For those of you who are new around here, I live in Indiana. And I love where I live. Soooo I tend to create a lot of fun little projects that use the shape of Indiana. And I recently realized that Indiana makes a perfect tote bag shape!
For those of you who are NOT new around here, this newest creation will come as no surprise. I'll admit, I am slightly obsessed.
This tote is super simple, and yet manages to be cute as well, especially with the leather and rivets for straps. I started with my classic Indiana pillow shape, and tweaked it for this new project. I made indiana a bit wider, and got rid of the dip of Lake Michigan at the top.
Just like in the Indiana stocking, this bag is fully lined, but sewn in a way that all the layers are sewn at once, so I only had to sew around the squiggly bottom edge once. Then I clipped it, turned the bag right side out, folded down the top, and topstitched it in place. A few rivets to hold the handles in place, and voila! the bag was done! It's even reversible, since the inside seams are completely hidden as well. I just made sure to hammer on the straps in a way that would look finished either way you flip the bag.
I'm definitely going to put this in my shop as a pattern, and maybe even offer it in kits too! And if you are local (let's face it, pretty much only local people are going to be interested in this post) then look out for these puppies at the Yelp Bazaar this December!
This is a guest post by Sonia Spence over at Fabric & Flowers. Go check out her awesome blog full of tips, tutorials, and patterns!
Sewing the Huxley Bag – a convertible rucksack
NOTE: this post may contain affiliate links. It will not cost you any money if you click on them and just means that I get a small commission for recommending it.
A little while ago, I was debating designing a new bag. My messenger bag was threadbare and I’d cut it apart to remove the hardware for my daughters’ bag! I wanted a bag that I could convert from a shoulder/ crossbody bag into a rucksack and although I had come across quite a few – I especially liked this one – they weren’t quite what I wanted. Then I saw the Huxley Bag by Goheen Designs and I was smitten. The idea of using rivets and other hardware seemed like good fun!
Originally, I’d hoped to have it finished in time for Festival of Quilts, but that didn’t quite happen……kids, holidays and the like mean everything’s taken a bit longer. I also decided to take my time to enjoy the making process: the pattern is rated as confident and there are a number of steps to follow – not in a scary way, mind! – and I’d made a few adjustments to it due to the fabric that I was using, which involved a bit more thinking!
I made a large View A and used a waxed cotton (from here) – it has a leather-like look, but is a bit thinner and provides an element of being waterproof which is handy! It meant that I could do without the webbing but had to adapt the pattern – both in terms of width and length (on some strap pieces, the pattern calls for leather to be top stitched to a longer piece of webbing) which required a little bit of planning.
I also decided to add a zip to the back pocket – I love having a secure place to keep valuables, especially when it’s being used as a messenger bag. I added the zip in between the outer and lining fabric of the back pocket and then secured the ‘free’ zip side straight on to the back piece of the bag with a few lines of stitching. However, I didn’t really read the pattern fully through – schoolgirl error! – and then realised I would have to alter the length of the bike straps in order to make it all look ok! Ah well, if you chose to do this, you can learn from my mistake!
Overall, the pattern is really well written. On first look at the download, it can seem slightly intimidating – there are over 40 pages! However, many of the early pages are used to share tips, and the rest of the pattern takes you through step-by-step in a clear and concise way.
Tips for accurate placement of rivets & poppers
I think that covers everything?! Someone on IG asked me if the bag was heavy, which is a really good question and one I had to think about! It makes sense that it would be with all the hardware on it, however, its actually quite tricky to tell. The waxed cotton is a heavier fabric anyway (the bag I made for my daughter weighs probably double the one I’d made out of cotton and wadding!) but having never sewn with leather, I’m not sure how this would compare? So far, all I can really say is that it is a good weight and I’ve not been put off using it!
Overall, I am so happy with the bag! It’s not the biggest rucksack – it’s best to think of it as a shoulder bag that converts into a rucksack – but is perfect for my needs. Having never used hardware before, I feel that it really lifts the finished look to a much more professional level. Not all of my rivets are perfect – in fact, there are a number of things that I could pick on as ‘could be better’ – but I think that’s the makers’ curse, isn’t it?! I’m trying to let these little things go though and concentrate on all the skills I learnt! I can see myself making another in the future, maybe using different fabrics and having made this one, I can see (hope!) that others will go together a lot quicker and easier!
See you soon,
creative business owner. designer. hoosier. crafter. runner. sewer. swing dancer. outdoor enthusiast. entrepreneur. wife. material hoarder.
My Instagram Feed:
Madeline Stage firstname.lastname@example.org
"Never give up on a dream because of the time it will take to accomplish it. The time will pass anyway."
- Earl Nightingale